1
/
von
1
Waltron Shop
Waltron Annual Care Essentials Kit - 9033X Sodium Analyzer
Waltron Annual Care Essentials Kit - 9033X Sodium Analyzer
Normaler Preis
$2,050.00 USD
Normaler Preis
Verkaufspreis
$2,050.00 USD
Versand wird beim Checkout berechnet
Anzahl
Verfügbarkeit für Abholungen konnte nicht geladen werden
The Essentials Care Kit for your Waltron 9033X Sodium Analyzer Includes the following:
| Item Code | Description-Reference | Qty |
|---|---|---|
| N1016-216 | Tubing - From inlet fitting to center port, lower side of heat exchanger | 1 |
| N1016-216 | Tubing - Constant head bottom left to top center port of heat exchange | 1 |
| N1016-216 | Tubing - Port 1, SV2 to top rear heat exchanger port | 1 |
| N1016-216 | Tubing - Heat exchanger top front to SV1 port 1 | 1 |
| N1016-216 | Tubing - Constant Head bottom left to top of SV1 | 1 |
| N1016-216 | Tubing - SV1, port 2 to SV2 top port | 1 |
| N1016-216 | Tubing - SV2, port 2 to SV3 top port | 1 |
| N1016-216 | Tubing - Lower back heat exchanger port to Cal 2 | 1 |
| N1016-216 | Tubing - Lower front heat exchanger port to Cal 1 | 1 |
| N1016-231 | Tubing - Entrainment to reagent bottle | 1 |
| W3040-099 | Tubing - SV3 port 2 to grab sample | 1 |
| PS-50285K44 | Tubing - Constant Head Drain to Main drain. Cut a taper at the end | 1 |
| N1016-307 | Tubing - Constant Head - Top Right fitting looped to top of constant head cap | 1 |
| N1016-308 | Tubing - SV1 Port 1 to Right Side Entrainment Body fitting | 1 |
| H1016-293 | Tubing - Flowcell to Drain | 1 |
| K1048-600 | O’ Ring - Thermistor Tip O-Ring | 1 |
| N1048-637 | O’ Ring - Flowcell Drain Tube | 1 |
| K1138-573 | Connector - Constant Head Drain & Main Enclosure Drain | 1 |
| N1138-620 | Connector - Barbed Straight Fitting (Qty 1 Frontside Heat Exchanger) | 1 |
| N1138-622 | Fitting - Qty 8 Solenoid Valves, Qty 2 for Exchanger | 4 |
| N1138-610 | Connector - CAL 1 and CAL 2 Connectors | 2 |
| N1138-604 | Connector - Barbed Fitting Entrainment Inlet from Constant head | 6 |
| N1138-625 | Connector - Barbed Fitting Entrainment from Buffer Bottle | 2 |
| N1138-632 | Connector - Connector for Buffer Bottle | 1 |
| N1138-602 | Connector - Barbed Fitting Constant Head Qty 3 | 3 |
| P1000-076 | Connector - Grab Sample Tube Connector | 1 |
| CL-100 | Syringe - Flushing heat exchanger, valves, constant head etc. | 1 |
| CL150 | Pack of cleaners for fittings, valves, orifices | 1 |
| W3040-099 | Tubing - Flushing tube for flushing syringe - 300mm | 1 |
Share
