Waltron 2410 Oil in Water Monitor

Waltron's 2410 Oil-in-Water Monitor is a robust online instrument developed specifically to measure the amount of hydrocarbons in clean water using optical sensors to measure absorbed and scattered light in a sample stream. The measurement distinguishes between oil droplets and turbidity. A microprocessor calculates the ppm oil concentration based on the sensor signal. The analyzer measures the concentration of oil continuously and activates alarms and relays as necessary. Applications include: boiler condensate returns, process cooling water, process steam monitoring and wastewater.  Available in manual- and auto-clean versions, the Waltron 2410 has many uses and will fit a large variety of online water analyzer applications.

PERFORMANCE

Range 
0 – 99 ppm 

Accuracy 
∓ 2 ppm 

Calibration 
Calibrates directly to clean water 

Current Outputs 
0 – 20mA, 4-20mA (800Ω min. load); 0-5VDC, 1 – 5VDC (50KΩ min. load) 

Alarms 
Two adjustable operating delay alarms (0 – 60 sec, 10 – 240 sec); contacting rating 8A @ 240V 

Power 
230/115VAC or 24VAC, 50/60Hz; consumption 10VA max 

CE Certification (on request) 
Meets low voltage and low electromagnetic compatibility directives 

Electrical Installation 
EN61010-1EC664 category 11 

OPERATING CONDITIONS

Sample Flow 
0.26 – 0.53 gal/min (0.1 – 2.0 L/min) 

Sample Temperature 
34 – 104° F (1 – 40°C) 

Ambient Temperature 
34 – 140°F (1 – 60°C) 

Pressure 
1.45 – 145 psig (0.1 – 10 bar) 

Humidity 
90% RH Max @ 131°F (55°C) 

MECHANICAL

Construction 
Meets IP55 

Dimensions 
Height=8.5” (215mm); Width=9.5” (242mm); Depth=2.9” (73mm) 

Weight 
4.96 lbs (2.25 kg) 

Finish 
Corrosion resistant